THERMAPEN® CLASSIC THERMOMETER – Selectech

June 11,2024

Description Choice of air, surface or penetration probe Lightweight, compact & easy to use High accuracy ±0.4 °C One-handed operation The Thermapen classic thermometer incorporates a large digital display with a precise read-out over the range of -49.9 to 299.9 °C with a 0.1 °C resolution and an accuracy of ±0.4 °C. The resolution can be switched to 1 °C, if required, via a switch in the battery compartment. The thermometer will power off automatically after ten minutes, maximising battery life. This feature can be disabled if not required. Both low battery (icon) and open circuit indication are also displayed, when applicable. Each industrial Thermapen is powered bytwo lithium coin cell batteries with a minimum life expectancy of 1500 hours. The probe conveniently folds back through 180° into the side of the instrument when not in use. The casing is.
Description Choice of air, surface or penetration probe Lightweight, compact & easy to use High accuracy ±0.4 °C One-handed operation The Thermapen classic thermometer incorporates a large digital display with a precise read-out over the range of -49.9 to 299.9 °C with a 0.1 °C resolution and an accuracy of ±0.4 °C. The resolution can be switched to 1 °C, if required, via a switch in the battery compartment. The thermometer will power off automatically after ten minutes, maximising battery life. This feature can be disabled if not required. Both low battery (icon) and open circuit indication are also displayed, when applicable. Each industrial Thermapen is powered bytwo lithium coin cell batteries with a minimum life expectancy of 1500 hours. The probe conveniently folds back through 180° into the side of the instrument when not in use. The casing is washable and includes Biomaster Antimicrobial Technology that reduces bacteria growth and the ergonomic rubber seal minimises the risk of the ingress of water, dust or food. Choice of probe stylesThe Thermapen classic thermometer is available with three styles of probe; surface, air or penetration. The fast response air probe is an invaluable tool in establishing the correct air temperature quickly in HVAC and laboratory applications. The surface probe is particularly useful in determining the temperature of hot plates or pipes etc. Please note: the accuracy and speed of response will be dependant on whether thesurface is flat and heat transfer compound is used. Waterproof Surface ProbeØ8 x 95 mm This waterproof ribbon surface probe is ideal for measuring the surface temperature of pipes, bearings, hotplates and other flat surfaces. Penetration ProbeØ3.3 x 108 mm This strong and versatile probe incorporates a pointed, general purpose tip, ideal for insertion into liquids and semi-solids. Air or Gas ProbeØ3.3 x 95 mm This fast response air or gas probe is ideal for measuring the air temperature in HVAC applications, laboratories and other temperature sensitive working areas. Optional Accessories: Protective PVC wallet with belt strap Protective silicone boot Glow-in-the-dark silicone boot with magnets Stainless steel wall bracket (screws not supplied)